96-Gas-Needles Sample Concentrator LTCON8-2
96-Gas-Needles Sample Concentrators is a device that is used to perform the rapid evaporation of the solvents from the samples in 96-needle microplate which contains 96×0.2ml microtubes in a single batch. It uses the principle of solvent evaporation to concentrate the samples. In a dry block heater, the stream of inert gas is passed above the surface of the sample which causes evaporation, and the sample gets concentrated.
Used in Drug screening, hormone analysis, liquid phase
Also known as Laboratory Concentrators
- The heater heats the sample rapidly to the evaporation temperature, and at the same time, the gas is blown to the surface of the solution through the gas needle, which promotes rapid evaporation of the solution and concentration of the sample
- The height of the air cavity can be adjusted. The length of a standard gas needle is 80 mm
- The entire equipment can be put into ventilation cabinet when the concentration sample in toxic solvents
- Built in overheat protection, automatic fault detection and fault beep alarm devices
Price: $755.00
Download Catalog
Get Quote
Download Catalog
Get Quote
Features
- The heater heats the sample rapidly to the evaporation temperature, and at the same time, the gas is blown to the surface of the solution through the gas needle, which promotes rapid evaporation of the solution and concentration of the sample
- The height of the air cavity can be adjusted. The length of a standard gas needle is 80 mm
- The entire equipment can be put into ventilation cabinet when the concentration sample in toxic solvents
- Built in overheat protection, automatic fault detection and fault beep alarm devices
- LED displays immediate temperature and diminishing time. Operation is simple
Specifications
| Temp. Control Range | R.T.+5°C ~100°C |
| Temp. Setting Range | 5 °C ~ 150 °C |
| Temp. Stability @ 40 ~100 °C | ±0.5 °C |
| Temp. Stability @ 100~150 °C | ±1 °C |
| Block Temp. Uniformity @ 100°C | ±0.5 °C |
| Block Temp. Uniformity @ 150 °C | ±1 °C |
| Temp. Display Accuracy | 0.1 °C |
| Heating Speed | ≤30 min (40 °C to 150 °C ) |
| Time Range | 1 min ~99 h 59 min |
| Air cavity Max. Lift Stroke | 275 mm |
| Gas-in Joint Outer Diameter | Φ7 mm |
| Nitrogen Pressure | ≤0.1 MPa |
| Nitrogen Flow Rate | 0~10 L/min |
| Needle Length | 80 mm |
| Sample Capacity | 1 standard plate block |
| Voltage | AC 220 V/AC 110 V, 50/60 Hz |
| Power | 400 W |
| Fuse | 250 V, 2 A / 3 A, Φ5 x 20 |
| Dimension (WxDxH) | W.220xD.260xH.445 mm |
| Net Weight | 5.5 kgs |
Optional Accessories
| Accessory Code | Name | Suitable Concentrator | Description | Dimension |
| 4100809008 | Block 17 | NDK200-1A | 0.2ml x 96 PCR plate | 78x114x26 mm |
| 4100809009 | Block 18 | NDK200-1A | flat bottom plate block | 81x123x19 mm |